elobau 4621273E - Safety-Relevant Parameters

4. Product-specific information EN
12.7.23 V2.1 15 / 24
Tabelle 8
ACHTUNG!
.
Warning of voltage and current spikes!
When connecting this product to external components, voltage and current
spikes may occur. Damage to machines and/or system parts therefore can-
not be ruled out.
 Make sure that no current or voltage peaks that are higher than the elec-
trical specifications of this product are caused by any external compo-
nents. Current or voltage peaks are produced, for example, by
capacitive or inductive loads.
 Avoid faulty wiring or short-circuits.
 Please also observe the information stipulated in EN ISO 14119.
4.2.7 Safety-relevant parameters
Value
4621273E
Value
4621213E
PL according to EN ISO 13849-1
e
SIL CL according to IEC 62061
3
PFH
D
5.77 x10
-10
5.81 x10
-10
Service life (in years)
20
Category according to EN ISO 13849-1
4
Hardware fault tolerance (HFT)
1
Max. switch off system reaction time
5