1. User information EN
12.7.23 V2.1 5 / 24
Observe all applicable health and safety conditions, laws and directives of
the respective machine. There are no known residual risks, if all of the infor-
mation contained in this operating manual is complied with.
Every non-intended use and all activities performed that are not described
in this manual represent a prohibited, incorrect use outside the legal limits
of liability of the manufacturer.
1.3.2 Foreseeable misuse
The following operating conditions are classified as misuse:
• Use in potentially explosive areas,
• use in aeronautical and aerospace applications, nuclear and military ap-
plications,
• operation without fuse,
• non-compliance with the technical data.
Operation contrary to the intended use will void the warranty.
WARNUNG!
.
Warning against misuse!
In case of incorrect or unintended use or manipulation, the use of this pro-
duct does not exclude risks to persons or damage to machine and/or sys-
tem components.
Make sure that no current or voltage peaks that are higher than the elec-
trical specifications of this product are caused by any external compo-
nents. Current or voltage peaks are produced, for example, by
capacitive or inductive loads.
Please also observe the information stipulated in EN ISO 14119.
1.4 Warranty and liability
Information
This product has a warranty of 24 months beginning at the time of
transfer of risk. The general terms and conditions of the manufacturer
apply to the warranty and liability.
Defects in the form of material or manufacturing defects that occur during
this warranty period shall be rectified free of charge either by repair or repla-
cement.
If a warranty is provided, the warranty period is not extended.
We reserve the right to charge for costs resulting from unjustified claims,
e.g. installation or operating errors.
To Next Page
Loading...
