Need help?Do you have a question about the ELSA 3L-SP and is the answer not in the manual?
Overview of the 3L-SP/AP panel and its functions as an Early Warning Leak Locating System.
Detailed information on connecting the 3L-SP/AP panel, including pin assignments and cable management.
Specific pin number assignments for various connections on the 3L-SP/AP panel.
Visual guide and explanation for connecting sensing and leader cables to the panel.
Procedure for powering up the 3L-SP/AP panel and verifying initial status indicators.
Step-by-step guide to test the system's leak detection and alarm functions.
Guidance on identifying and resolving false alarms related to cable setup and environment.
Recommendations for tagging sensing cable locations to improve leak detection accuracy.
Guidelines for using hold-down clips to properly secure and route the sensing cable.
Technical dimensions for mounting the 3L-SP/AP control panel.
Summary of the main features and capabilities of the 3L-SP/AP leak detection system.
Specifications for operating temperature, storage, and humidity for the panel.
Details on the power supply voltage, frequency, and consumption for the 3L-SP/AP panel.
Specifications for the panel's dry contact relays for leak and trouble signals.
Information about the communication interface for system supervision.
Details on the RS485 and other serial communication protocols supported by the panel.
Details on the international standards the product complies with, such as EMC.
Guide for connecting multiple detection zones to a single 3L-SP/AP panel.
Instructions for setting up a fail-safe loop-back connection for enhanced cable integrity.
Diagram and explanation for integrating external relays and solenoid valves with the panel.
Guide on how to use T-joint connectors for sensing cable installations.
Instructions for connecting the 3L-DS distance spacer for multi-zone setups.
Schematic for connecting 3L-SP panels with 3L-SP/AP panels for expanded systems.
Details on configuring and using the RS485 Modbus communication protocol.
Recommended schedule and procedures for maintaining the leak detection system's performance.
Contact details for ELSA Advanced Systems Pte. Ltd. for support and inquiries.
A checklist for verifying the system's functionality and proper installation before operation.
General troubleshooting steps for common issues encountered with the leak detection system.
Detailed guide to diagnose and resolve false alarms caused by external factors or installation errors.
Analysis of scenarios causing continuous false alarms and recommended solutions for chemical contamination.
Analysis of scenarios causing intermittent false alarms, including cable touching metallic parts and coiling.
General| Brand | ELSA |
|---|---|
| Model | 3L-SP |
| Category | Control Panel |
| Language | English |
To Next Page