AVR-280 HOME THEATRE RECEIVER

R

MODE

DSP

INPUT

BALANCE

TUNING BAND

VOLUME/TUNING

POWER

STANDBY

MUTE

AVR-280

VOLUME

TUNING +

COAX

DIGITAL DVD/SAT

AUX 1

AUX 2

TUNER

RDS

TV

R

MEMORY

DELAY

DSP

MODE

SPK

MODE

TEST

BASS

BOOST

BALANCE

NIGHT

DELAY

++++

-

MONO

BAND

CENTER

REAR

OPT

AUTO

MANUAL

PR +

PR -

TUNING -

2

1

3

2

3

1

14

OPERATION AND FUNCTIONS

.........

Switch on the receiver through the mains switch.

Press the STANDBY key of the remote control to switch to standby mode.

The display is switched off and all functions are reduced to a minimum.

Thus the power consumption of the receiver is reduced to a minimum. In

standby mode the receiver only responds to the STANDBY key of the

remote control.

To completely switch off the receiver and prevent any power consumption,

the receiver must be switched off through the mains switch.

Consider the environment and switch off the unit after use.

Selection of input source

Switch on the AV receiver and the television set, if desired.

Select the corresponding audio/video input on the television set.

Now you can call the currently active input source. Select tuner to listen to the

radio, AUX 1 or AUX 2 if an analogue device has been connected, or Optical or

Coaxial in connection with a digital signal from a DVD player or a digital satellite

receiver.

Select TV if you wish to hear a television broadcast through the receiver.

Some television sets require a special setting on the television set to ensure correct use of the SCART

channel.

If in doubt, please read the manual provided with your television set.

On and Off, standby

Brand	Eltax
Model	AVR-280
Category	Receiver
Language	English

Eltax AVR-280 User Manual

Table of Contents

Questions and Answers:

Eltax AVR-280 Specifications

Related product manuals