4 Front Panel Operation
18 User’s Guide Smartpack Monitoring & Ctrl Unit,
350003.013, v5-2006-11
Modes of Operation
The controller’s display is either in Status Mode or in Menu Mode.
Status Mode
When the front keys are not in operation, the display is in Status Mode. The following
information is then scrolled through the display:
• The upper line continuously displays the battery voltage.
• The lower line continuously scrolls the following information:
o Battery Current
o Load Current
o Active alarms
o Other messages
Menu Mode
When the front keys are in operation, the controller’s display switches to Menu Mode and
the following information is scrolled through the display:
• The upper line shows the name of the active menu or sub-menu
• The lower line indicates which key to press
Notice that if no keys are pressed within 30 seconds, the display will automatically switch
from Menu Mode and to back to Status Mode.
Operating Menus, Overview
The Smartpack-based DC power system’s functionality is accessed via a network of
software menus and submenus, enabling you to configure and control the whole power
system.
The functionality is divided in two different hierarchical
menu structures: the User Options menus and the
Service Options menus (password protected, only
authorised personnel have access to them).
Special, not so frequently used options — such as
calibration and adjustments — are accessible in the
Service Options sub-menus.
Display in Status Mode
UserOption
ServiceOption
Level 1
To Next Page
Loading...
