Eltek Smartpack - User and Service Options Access

4 Front Panel Operation
User’s Guide Smartpack Monitoring & Ctrl Unit,
350003.013, v5-2006-11 19
User Options UO
When you “enter” Menu Mode, you access the User Options.
For description of the User menu options, read chapter “Functionality Description” page
22. Also, refer to the PowerSuite online Help system.
How to browse the display menus
o Entering Menu Mode
Press on the
key to change from
Status Mode to Menu Mode
o Browsing “down” to a menu option
Press the
key, to scroll down within
the same menu level, and find menu
options (functions or parameters)
o Selecting a menu option
Press on the
key to select the
displayed menu option or parameter
o Browsing “up” to a menu option
or level
Press the
key to scroll up to the
previous menu option, and out to the
previous menu level.
User menu <UserOption>
AlarmReset
NomVolt
BoostVolt
LoBattMaj
VoltageInfo LoBattMin
HiBattMaj
HiBattMin
LVBD
LVLD 1.1
DisplayMessages
Message ↓↑
SoftwareInfo
SerialNumber
NoOfRects. nn
RectCurrent
Rectifier Info RectSerialNumber
Rect.PrimaryVolt
Rectifier Status
Rectifier Temp
Rect. OutputVolt
Rectifier SW Ver
NoOfPhases nn
Mains Info Mains Status
Mains Voltage
Temp Level Info
Level ↓↑
NoOfString Nn
BattStringCurr ↓↑
Battery Info
BattStringTemp ↓↑
BattBlockVolt ↓↑
Level 2 Level 3
…
Firmware 402073.003 1v00