ELTEX KNH35 - 4.4 Selecting the setpoint; 4.5 Selecting the operating parameters (Password protection)

28 BA-en-3031-2004_KNH35
4.4 Selecting the setpoint
The setpoint change will not be saved until the change is acknowledged
with the setpoint key.
4.5 Selecting the operating parameters (Password protection)
The settings of all other operating parameters can be accessed via the
password-protected Setup menu item. The password should be made
available only to authorized personnel.
Password entering
After selecting the Setup menu item, the display will show <Password>.
Enter the password by entering the key sequence < > <> <> <> <3>.
If the entry is correct, the first menu item <HV output> will be displayed.
The operating parameters include output-specific parameters and global
parameters.
Fig. 16:
Setpoints
Z01101e
Main menu
Setpoint
setpoint
+30.0 kV
Fig. 17:
Operating
parameters
Z01102e
Main menu
Setup
Password
HV output
Setup global