34 BA-en-3031-2004_KNH35
4.7 Global operating parameters
Selecting the language for the display messages.
In particularly critical applications where the selected setpoint voltage or
current must not be altered, this option may be used to determine the
defined output voltage or output current. It must be deactivated before the
setpoint can be modified again.
This function can be used to change the display contrast.
When acknowledging this menu entry with <3>, all settings are returned
to the default settings (delivery status).
Fig. 19:
Global operating
parameters
Z01103e_b
Main menu
Setup
Password
HV-output
Setup global
Language
Change setpoint
LCD contrast
Load default
Language
language
english
Change setpoint
change setpoint
Yes
LCD contrast
LCD contrast
3
Loading the default settings
load default
settings
To Next Page
Loading...
