____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 7
1 x RJ-45
1
/RJ-11
2
for connection of analogue phones:
1 PON SC/APC port for connection to operator's network.
Ethernet RJ-45 LAN ports for connection of network devices:
– 1 RJ-45 10/100 Base-T port;
– 1 RJ-45 10/100/1000Base-T port;
1 RF port to connect TV
2
.
The terminal uses an external adapter for 220V/12V power supply.
The device supports the following functions:
Network functions:
– bridge or router mode;
– PPPoE (PAP, CHAP, MSCHAP authentication);
– static IP address and DHCP (DHCP client on WAN side, DHCP server on
LAN side);
– UPNP;
– IPSec;
– NAT;
– Firewall;
– NTP;
– QoS;
– IGMP snooping;
– IGMP proxy;
– Parental Control.
VoIP
– SIP
– audio codecs: G.729 (A), G.711(A/U), G.723.1;
– ToS for RTP packets;
– ToS for SIP packets;
– echo cancellation (G.164 and G.165 guidelines);
– silence detector (VAD);
– comfortable noise generator;
– DTMF signal detection and generation
– DTMF transmission (INBAND, RFC2833, SIP INFO)
– Fax transmission: upspeed/pass-through. G.711, T.38
Value Added Services (VAS):
– Call Hold;
– Call Transfer;
– Call Waiting;
– Forward unconditionally;
– Forward on ‘no answer’;
– Forward on ‘busy’;
– Caller ID Display for ETSI FSK;
– Anonymous calling;
– Warmline;
– Flexible dial plan;
– voice mail notifications (MWI);
– Anonymous call blocking;
– Call Barring;
– DND (Do not disturb).
1
Only for NTU-2V
2
Only for NTU-2VC