____________________________________________________________________________________
____________________________________________________________________________________
18 NTU Optical Network Terminals
Table 9 – Description of the controls located on the bottom panel
a functional key that reboots the device and resets it to the
factory settings
2.5.4 NTU-RG-1402G-W
The NTU-RG-1402G-W subscriber terminal is designed as a desktop device in plastic housing.
The Figure 10 shows the NTU-RG-1402G-W rear panel layout.
Fig. 10—NTU-RG-1402G-W Rear Panel layout
The connectors and controls located on the rear panel of NTU-2W are shown in the table .
Table 10—Description of the LEDs and Controls Located on the Rear Panel
SC port (socket) for PON with GPON interface
2 connector for external drives and other USB devices
2 RJ-11 ports for connection of analogue phones
4 RJ-45 ports for connection of network devices
The figure 11 shows NTU-RG-1402G-W side and front panels.
To Next Page
Loading...
