112  VoIP Subscriber Gateways 
 
Record filtering 
Call history records can be filtered by one or several parameters. 
Filter list: 
-  FXS ports – FXS port number of the device; 
-  Local number – TAU subscriber number; 
-  Remote number – remote subscriber number; 
-  Opposite side IP address – IP address of a remote host; 
-  Call  received  time  from/to  –  call  received/performed  time  period  in  the  'hh:mm:ss 
dd.mm.yyyy'  format  (for  example,  for  22  February  2012  at  6:31  p.m.):  '18:31 
02/22/2012', '22 feb 2012 18:31:00', '6:31:00 pm 22 February 2012' etc. 
-  Call start time from/to – call start time period in the 'hh:mm:ss dd.mm.yyyy' format (for 
example, for 22 February 2012 at 6:31 p.m.): '18:31 02/22/2012', '22 feb 2012 18:31:00', 
'6:31:00 pm 22 February 2012' etc. 
If the assigned data is not found, it will be highlighted in red color. 
-  Call status - transient state or a reason of call termination; 
-  Call type – call type (all types), outgoing and incoming. 
To filter log by assigned parameters, click the ‘Apply filter’ button. To translate all filter values 
back to initial state, click the ‘Cancel’ button.