94 VoIP Subscriber Gateways
- Outbound Security – incoming traffic is permitted (from WAN to WLAN), outputting
traffic (from WLAN in WAN) forbidden;
- High Security – incoming traffic is forbidden (from WAN to WLAN), outputting traffic
(from WLAN in WAN) is forbidden.
You may set the rules permitting reception/transmission traffic to specific address in the
‘Firewall rules’ submenu.
To store changes to the operative memory of the device, click the Save Changes button. To store
settings into the non-volatile memory, click Apply button.
2.5.2 The ‘Firewall Rules’ submenu
Use the submenu to set transit traffic rules.
Description of ‘Firewall rules’ table.
Changes in this submenu take effect immediately after clicking the 'Apply' button. Device
reboot is not required.