127 VoIP Subscriber Gateways
APPENDIX B. THE USE OF WIZARD MENU
Wizard menu allows users to configure the gateway without large number of advanced setting
parameters that are usually installed by default.
The system automatically directs a user to the ‘Wizard’ menu at the first run.
You can use the quick settings by using the ‘Wizard’ menu or browse to the more detailed
gateway configuration by selecting the other tab on the current page of web-configurator.
The menu consists of several configuration steps. To pass to the next step, click ‘Next’ button. To
return to the previous step, click ‘Previous’ button. After checking data entered, you should apply
configuration by clicking ‘Apply’ button.
Step 1. Protocol
Selecting the used protocol for connection via TCP/IP - DHCP, Static, PPPoE, PPTP, L2TP, 3G/4G
USB modem. Configuration of all the ports is described above in this user manual.
Step 2. Network Settings
In dependence to selected protocol, the following parameters must be set up: VLAN ID, WAN IP
address, WAN netmask, 1st DNS-server, 2nd DNS-server, Default Gateway, PPTP/L2TP Server address
and others. The more detailed description of the options is given above.
To Next Page
Loading...
