116 VoIP Subscriber Gateways
‐ host
‐ net
‐ port.
If the type is not defined, host value is meant.
2. dir – specifies the direction relative to the object. The classifier accepts the following
values:
‐ src (the object is a sender)
‐ dst (the object is a recipient)
‐ src or dst (a sender or a recipient)
‐ src and dst (a sender and a recipient).
If the dir is not defined, src or dst is meant. To enable the mode for capturing traffic
from any interface, inbound and outbound classifiers can be used.
3. proto – specifies the protocol according to which packets are structured. The classifier
accepts the following values:
‐ ether
‐ ip
‐ arp
‐ decnet
‐ tcp
‐ udp.
If the primitive does not contain protocol classifiers, it is expected that all protocols
compatible with object type match the filter.
Maximum traffic dump size is 60MB. At exceeding of the threshold, new files will be
written instead of outdated ones.
3.4 The ‘Reboot’ menu
To reboot the device, click ‘Reboot’ button on the left panel of Web configurator. After that,
confirm it by clicking ‘Yes, really reboot now’. The device rebooting may continue about one minute.
To Next Page
Loading...
