ELTEX TAU-8.IP - The Traces Menu; The Syslog Settings Submenu

113 VoIP Subscriber Gateways
3.3 The ‘Traces’ menu
Access to the ‘Traces’ menu is performed on the administrator privileges.
3.3.1 The ‘Syslog Settings’ submenu
Use this submenu to perform parameter settings for output of remote/local log.
Syslog Settings:
- Output trace to – mode of syslog output:
 console – display log into continuous console of the device (continuous console is
connected via COM port by using special adapter; connection parameters are
115200, 8, n, 1 and n);
 syslogd – trace is displayed into remote and local log;
 disable – trace is disabled;
 telnet session 0 (1, 2, …) – if the device is connected via Telnet protocol you may
display trace in the of active Telnet-session.
Remote log:
- Syslog server address – IP address or domain name of remote log server; empty field
means that the remote log is not used;
- Syslog server port – server port to record remote log (the default value is 514).
Local Log:
- Log file name – fill in this field by file name (file will be recorded into catalog /var/log;
- Log file size (kB) – file size in kB.