ELTEX TAU-8.IP - Page 162

162 VoIP Subscriber Gateways
save
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
EXEC
Example
tau-8# save
save config
Image 0: Flag 0, Image 1: Flag 1
tar: removing leading '/' from member names
compressed 126485 bytes to device 0
shell
The command is intended for enter the shell mode.
Syntax
shell
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
EXEC
Example
tau-8# shell
BusyBox v1.15.3 (2017-09-05 14:59:00 +07) built-in shell (ash)
Enter 'help' for a list of built-in commands.
[admin@tau:/root]
upgrade image
The command is intended for updating the firmware.
Syntax
upgrade image <value1><value2>
Parameters
<value1> - TFTP server IP address where the firmware will be downloaded from;
<value2> - firmware file name (string: 64 characters)
Privilegy
priv