ELTEX TAU-8.IP - Page 171

171 VoIP Subscriber Gateways
snmp enable
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Disable SNMP.
Example
tau-8(config-net)# snmp enable
snmp trapsink
Sets the address of the SNMPv1-trap traps receiver.
Syntax
snmp trapsink<value>
Parameters
<value> - IP address
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Set the default trap destination address value (default: address is not set)
Example
tau-8(config-net)# snmp trapsink 192.168.118.7
snmp trapsink_v2
Sets the address of the SNMPv2-trap traps receiver.
Syntax
snmp trapsink_v2 <value>
Parameters
<value> - IP address
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Set the default trap destination address value (default: address is not set)
Example
tau-8(config-net)# snmp trapsink_v2 192.168.118.9