ELTEX TAU-8.IP - Page 178

178 VoIP Subscriber Gateways
priv
Command mode
CONFIG-VOICE-PORT, CONFIG-VOICE-PROFILE
Negotiation function 'no' command
Set the upper range value of flash event detection by default, ms (default: 600).
Example
tau-8(config-voice-port)# flash max 700
hybrid rx
Sets the gain value (dB) for signals received in the differential system.
Syntax
hybrid rx <value>
Parameters
<value> - number: -230...-20
Privilegy
priv
Command mode
CONFIG-VOICE-PORT, CONFIG-VOICE-PROFILE
Negotiation function 'no' command
Set the default value (default: -70).
Example
tau-8(config-voice-port)# hybrid rx -20
hybrid tx
Sets the gain value (dB) for signals transmitted in the differential system.
Syntax
hybrid tx <value>
Parameters
<value> - number: -170...-60
Privilegy
priv
Command mode
CONFIG-VOICE-PORT, CONFIG-VOICE-PROFILE
Negotiation function 'no' command
Set the default value (default: 0).
Example
tau-8(config-voice-port)# hybrid tx 20
stopdial
The command is intended for enabling dial stop using # character.
Syntax
stopdial
Parameters