ELTEX TAU-8.IP - Page 185

185 VoIP Subscriber Gateways
Syntax
dtmfmode rfc2833
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-SIP
Negotiation function 'no' command
Set the default dialing signaling method (default: Inband).
Example
tau-8(config-sip-profile)# dtmfmode rfc2833
tau-8(config-sip-profile)#
dtmfmode info
Sets the transmission mode for digits of extension dialling.
Syntax
dtmfmode info <value>
Parameters
<value> - dtmf-relay|dtmf|audio
Privilegy
priv
Command mode
CONFIG-SIP
Negotiation function 'no' command
Set the default dialing signaling method (default: Inband).
Example
tau-8(config-sip-profile)# dtmfmode info dtmf
tau-8(config-sip-profile)#
fax detect
The command is intended for setting fax detection mode.
Syntax
fax detect <value>
Parameters
< value > – parameter value:
none - detection is disabled;
caller - detection on transmitting side;
callee - detection on receiving side;
both-detection on both sides (default).
Privilegy
priv
Command mode