Need help?Do you have a question about the ELTRA ON-900 and is the answer not in the manual?
General| Brand | ELTRA |
|---|---|
| Model | ON-900 |
| Category | Measuring Instruments |
| Language | English |
Proper placement and environmental considerations for the analyser and balance.
Detailed diagram identifying components on the analyser's front panel.
Instructions for connecting the analyser to the electrical power supply.
Details on the rear panel connections for data transfer and communication.
Guidelines for connecting compressed air and carrier gas supplies.
Explanation of the two cooling water circulation systems.
Step-by-step procedure for filling and bleeding the cooling system.
Procedures for setting and adjusting gas flow rates for optimal analysis.
Detailed steps for performing analysis and understanding different operational modes.
Recommended procedures for handling work breaks and analyser standby.
Explains the concept and methods for separating different oxygen phases.
Lists specific applications and settings for analysing different materials.
Describes the function for automatically reducing carrier gas consumption.
Overview of maintenance tasks and their recommended frequencies.
Instructions for safely installing and removing reagent tubes.
Details on the chemicals and procedures for filling reagent tubes.
Guidelines for replacing O-rings on reagent tubes and furnace components.
Procedure for cleaning or replacing the quartz wool in the dust trap.
Steps for cleaning the analyser furnace to ensure optimal performance.
Instructions for replacing worn graphite tips and upper electrodes.
Explanation of how the analyser measures oxygen and nitrogen in samples.
Diagram illustrating the flow path of gases through the analyser system.
Detailed description of the infrared cell's function and operation.
Explanation of the thermoconductivity cell for nitrogen detection.
Lists part numbers for various components of the analyser.
Instructions and guidelines for packing the analyser for transport.
Common problems and their solutions for the analyser.
Requirements and checks before installing the ON-900 analyser.
To Next Page
