Need help?Do you have a question about the ELTRA Thermostep TGA and is the answer not in the manual?
General| Sample Weight | up to 5g |
|---|---|
| Balance Resolution | 0.1 µg |
| Heating Rate | 0 ... 50 K/min |
| Atmosphere | inert, oxidizing, or reducing |
| Balance Sensitivity | 0.1μg |
| Crucible | platinum |
| Data Acquisition | Real-time data collection |
| Software | Proprietary software for data analysis |
Diagnosing and resolving communication issues between the TGA and its controller or balance.
Troubleshooting specific issues related to the TGA controller connection and settings.
Troubleshooting specific issues related to the TGA balance connection and settings.
Resolving issues where the TGA cover fails to open automatically post-initialization.
Steps to fix a misaligned balance pedestal for accurate measurements.
Diagnosing and fixing problems with the carousel failing to reach its home position.
Troubleshooting the carousel's inability to locate correct crucible positions.
Details on the hardware and software prerequisites for the TGA analysis software.
The initial window for accessing the TGA software, managing accounts and settings.
The primary interface for controlling child windows and software functions.
Window for adjusting and saving various software and instrument settings.
View and manage crucibles within the furnace, including ID and status.
Displays and browses data related to crucibles and analysis outcomes.
Monitors the real-time operational status of the TGA device components.
Creating, editing, and managing analysis configurations (applications).
Procedures for balance operation, calibration, and status monitoring.
Assigning and configuring serial communication ports for instrument connection.
Detailed settings for analysis, appearance, device, heater, and weighing.
Managing crucibles on the carousel, including adding, deleting, and status.
Defining and performing data export for analysis results.
Creating custom expressions for calculating analysis results.
Step-by-step guide for installing the TGA software.
Controlling and calibrating the carousel motor for precise positioning.
Understanding the different operational phases of the TGA analysis cycle.
To Next Page
