IT
22
40540 - 40542 - 40540.D - 40547
"Simplified" programming via entryphone push buttons
Programming must be carried out with the system switched on, without active communication and only after the
entryphones/video entryphones have been connected to the system and the entrance panels have been programmed.
Configurations
The entryphone can be configured in the following three ways:
• "Simplified” programming via entryphone push buttons
• Dip switch configuration: designed to perform advanced configuration via an internal programmer consisting of 12
dip switches, without the help of other tools (configuration software, PC and interface).
• Programming via "SaveProg” configuration software in the Due Fili Plus system.
To Next Page
Loading...
