IT
25
40540 - 40542 - 40540.D - 40547
Programming push buttons for intercom calls (excluding the lock release button)
1. In the case of a handset entryphone, raise the handset and bring it to your ear to listen to the sound feedback emitted
by the handset during the programming phase.
2. Press the push button to be programmed and hold it down for at least 6 s.
3. When the entryphone has emitted a “beep” release the push button being programmed
4. Press the lock button on the entryphone/video entryphone you want to call.
5. Another “beep” confirms the push button for intercom calls has been programmed.
beep
1
beep
2 43 5
> 6 s
> 6s
beep
beep
2 43 5
To Next Page
Loading...
Need help?
General
