EMAK GS35 - Oil Pump, Bar, and Shock Absorber Maintenance; Oil Tank Breather Check

General failures’ analysis
GS35 – GS350 – MT350 – MT3500 chainsaws
Warning!
Make sure the O-ring (I) is
seated before inserting the tube
I
4) Oil pump, bar and shock absorber
a) Oil tank breather inspection
b) Sprocket inspection
c) Chain brake inspection
d) Oil pump and oil filter inspection
e) Worm gear inspection
f) Shock absorber replacement
g) Lubrication and bar maintenance
a) Oil tank breather inspection
• Clean with compressed air
• Verify the quality of the bar and chain oil