• disengage the cutting means
• bring the cutting-means assembly to
•
•
The pedal has to be released
gradually, as a sudden engagement
may cause the vehicle to tip over
and the driver to lose control.
Gradually reach the desired speed
To change gear, press the clutch
•
gradually increasing pressure on the
Drive can only be engaged following
the procedure illustrated (par. 5.7 to
prevent sudden engagement which may
cause the vehicle to tip over and the driver
to lose control, especially on slopes.
First reduce the machine’s speed by
reducing the engine’s r.p.m., and then
Reverse must be engaged
when the machine has stopped.
Gradually release the pedal to engage the
Grass cutting
bring the cutting-means assembly
To proceed in reverse gear
with the cutting means engaged, it is necessary
to press and hold the consent button (par.
5.9) so as not to cause the engine to stop.
cutting-means assembly to the highest position:
–
–
–
Suggestions for maintaining
appearance, it should be cut regularly. A
To Next Page
Loading...
