The cutting means must be in good
to get the necessary thrust to push the
cuttings through the collector channel.
During hot and dry periods, the grass
probable causes are either badly sharpened
means assembly and damage its
for
rear collection models only)
NOTE The emptying of the grass catcher
can only be done with the cutting means
disengaged, otherwise the engine stops.
•
•
disengage the cutting means (par.
close up the grass catcher so that it
for
rear collection models only)
•
assembly in its highest position:
STOP
To stop the machine:
To avoid backre, leave the throttle in
the minimum "tortoise" speed position for
20 seconds before switching o the engine.
To keep the battery
charged, do not leave the ignition key
in the «on» or «headlights on» position
when the engine is not running.
The engine may be very warm
immediately after it is shut o. Do not
touch the exhaust or adjacent parts.
This can cause burn injuries.
storing in an enclosed space.
To Next Page
Loading...
