–
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or hazards.
Before conducting any inspections,
cleaning or maintenance/adjustment
interventions on the machine:
• disengage the cutting means;
• shift into neutral;
• engage the parking brake;
• stop the engine;
• remove the key, (never leave the
keys in the ignition or within reach of
children or unauthorised persons);
• make sure that all moving parts
have come to a complete stop;
• read the relevant instructions;
• Use suitable clothing, protective
gloves and goggles
•
•
assembled spare parts and attachments
or damages caused by such parts.
• Genuine spare parts are supplied by
NOTE The type of fuel to use is
given in the engine manual.
The machine is delivered
to the client without fuel. Follow all the
instructions in the engine manual.
.
Do not drip petrol onto
the plastic parts to avoid ruining them.
In the event of accidental leaks, rinse
immediately with water. The warranty does
not cover for damage to plastic parts of the
bodywork or the engine caused by petrol.
NOTE Fuel is perishable and should
not remain in the tank for more than 30
days. Empty the fuel tank before storing the
machine for long periods of time (chap. 9).
Allow the engine to cool
before emptying the fuel tank.
Place a suitable container under
The next time the machine is used,
check that there are no fuel leaks from
the tubes, fuel stopcock or carburettor.
NOTE The type of oil to use is
given in the engine manual.
The machine is delivered
to the client without engine oil.
Follow all the
instructions in the engine manual.
To Next Page
Loading...
