for
rear collection models only)
Empty the grass catcher
cuttings and soil residue
Replace the grass catcher and clean
the grass catcher, empty and rinse it,
Clean the cutting-means assembly thoroughly
Keep people or animals away from
the surrounding area when cleaning
the cutting-means assembly.
means assembly and the discharge chute,
– the grass catcher or the rear
discharge guard mounted in place
(for rear collection models only)
– the side discharge chute mounted (for
models with side discharge only);
–
–
– the engine running
– the transmission in neutral
– the cutting means engaged
•
In order not to compromise
the eciency of the electromagnetic clutch:
- do not let the clutch come into contact with oil;
- do not spray pressurised water
directly on the clutch unit;
- do not clean the clutch with petrol.
Do not let debris and dried grass
accumulate in the upper part of the
cutting-means assembly in order
to maintain maximum machine
eciency and safety levels.
cutting-means assembly:
•
•
•
•
•
or in charging the battery could permanently
damage the battery elements.
must be recharged as soon as possible.
Recharging must be
done using a battery charger at constant
voltage. Other recharging systems can
irreversibly damage the battery.
•
maintenance battery-charger supplied
This connector must
only be used for connection to the
maintenance battery-charger indicated
by the Manufacturer. For its use:
– follow the instructions given in the
relative instructions manual;
– follow the instructions in the battery manual;
•
You must go to a specialized
Service Centre or contact your Dealer
if the following are malfunctioning:
- the brake
To Next Page
Loading...
