Embedded Systems LogicMachine5 - Schedulers; Add New Scheduler; Scheduler Events

135
65. -- error while uploading
66. if err then
67. alert('FTP upload failed: %s', err)
68. end
6.5. Schedulers
Schedulers contain administration of user mode schedulers. Schedulers allow for end user to
control KNX group address values based on the date or day of the week.
6.5.1. Add new scheduler
By clicking on the Schedulers  Add new scheduler you will see such parameter window:
 Object  the object group address which will be controlled by scheduler
 Active  define this scheduler as active or not
 Name  name of the scheduler
 Start date  start date of the scheduler
 End date  end date of the scheduler
6.5.2. Scheduler events