Embedded Systems LogicMachine5 - Object Value Export Via Xml

261
22. Object value export via XML
Make KNX objects XML readable
In the Objects tab click on the objects which you want to receive the current value by XML
request. Check the Export object
XML request from external PC
The XML request looks like this:
http://remote:remote@192.168.1.211/cgi-bin/scada-remote/request.cgi?m=xml&r=objects
Parameters:
 address  object address (e.g. 
 name  
 data  
 datatype  object datatype (e.g. 1 or 5.001)  standard KNX data types
 time  object update time (UNIX timestamp)
 date  object update time (RFC date)
 comment  
 tags  
Note! To get list of objects that have been updated after specific time you can pass an optional
amp format)