EasyManua.ls Logo

embrace Wave+ - Page 47

embrace Wave+
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Blood Glucose Monitoring System
CAUTION:
If LO or HI appears on the screen:
If you see “HI” or “LO” displayed, your blood glucose level may be above 600 mg/dL or
below 20 mg/dL. Test again using ngertip testing, DO NOT test on palm or forearm.
If you still receive the same result, call your physician or healthcare professional
immediately
If test results do not match with how you feel:
Make sure you have performed the test correctly as explained in Page 38. Then, conduct
a glucose control test to check that the system is working properly (Page 31). Repeat
the test using a blood sample taken from a ngertip (do not use an alternative site).
If the test result still does not match how you feel, contact your doctor or healthcare
professional.
Do not ignore test results. Do not alter your blood glucose management or treatment
without rst consulting your doctor or healthcare professional.
Step 6. -Select the before/after meal marker
With the test result on the display, and the test strip STILL IN THE METER. Press either “▲”
or “▼” buttons to select
for before meal, for after meal or blank if the test result does
not apply. Press “
” to conrm your choice and advance to select exercise state.

Table of Contents

Related product manuals