CHAPTER 1. INTRODUCTION 4
1.3 FMF and VEG compressor series description
1 -
Fence cover
2 -
Cord anchorage
3 -
Screw
4 -
Grommets
5 -
Compressor shell
6 -
Process tube
7 -
Discharge tube
8 -
Suction tube
1
2
3
4
5
6
7
8
1.4 Product handling
• Inverter is sensitive to Electrostatic Dis-
charges. Take care with product handling
until nal assembly.
• Special care must be taken to avoid me-
chanical impacts on the inverter during
assembly process.
• The environment must be properly pro-
tected against ESD.
• The workers that handle the inverter must
be Earthed through adequate ESD wrist
strap and must wear ESD gloves.
• Do not hold by the wiring.
• Do not use the inverter if it drops during
handling.
To Next Page
Loading...
