DPSI RV Family Operating Instructions Version 2.0
Page 11 of 48
DPSI Version Receiver-
Channels
Servo-
Connections
Specialty
DPSI RV Mini 5 5 8* ---
DPSI RV Mini 6 6 7* ---
DPSI 2001 RV 10 26* 2 outputs for unreg.
battery voltage
DPSI RV 12 32 ---
DPSI Mini 5
ESP
5 8* 3 outputs for unreg.
battery voltage
DPSI Mini 6
ESP
6 7* 3 outputs for unreg.
battery voltage
* Connect additional servos directly to the receiver
3. The DPSI RV-Family in Headwords
Dual power supply with regulated supply voltage for receiver AND
servos
Output voltage adjustable in 4 steps from 5.0 volts to 5.9 volts
(5.9 volts for DPSI 2001 RV)
Compliant to all manufacturers RC receiver sets
Continuously constant servo power through constant supply
voltage
LiIon / LiPo cells usable
5-, 6-, and 7-cell NiCad / NiMH batteries usable
Electronically, failsafe on/off switch transmitter with additional
connectivity for external LED voltage displays
Short-circuit-proof servo pulse amplification in current saving
APP-Technology (Advanced Push Pull)
HFIB (High Frequency Interference Blocking) blocking of HF
interference caused by long servo cables (for each servo
individually)
To Next Page
Loading...
