DPSI RV Family Operating Instructions Version 2.0
Page 31 of 48
If needed, a small strip of adhesive tape (sticky tape or the like)
protects the jumper from slipping out.
Setting the voltage of the “DPSI RV Mini 5“ to 5.6 Volt:
The jumper position is printed on the housing of each DPSI RV.
Hint:
The output voltage of the DPSI 2001 RV is fixed to 5.9 volts. Other voltages are
available upon customer request.
Hint:
DPSI RV systems which were manufactured prior of June 2006 the output
voltage is slightly different: 4.8V, 5.2V, 5.5V and 6.0V were available. Available
output voltages are printed on top of the housing.
To Next Page
Loading...
