EMD Serono Easypod - Sound; Name

12
Section 1. Getting Started
Device settings
Sound
1. Open the “Device settings” menu (12a).
2. Use the “” key to highlight
”Sound” (12b).
3. Select “Change” to open the
“Sound” menu. The current setting
will be highlighted.
4. Use the “” key to choose “On”
or “Off” (12c).
5. Select “OK”.
Name
1. Open the “Device settings” menu (12d).
2. Use the “” key to highlight
“Name” (12e).
3. Select “Change” to open “Name”.
4. Use the “OK” key to move the cursor
under the letter you would like to
change, and use the “” key to
scroll through the alphabet (12f).
5. When the correct letter appears, select
“OK” to move to the next letter.
6. Continue pressing “OK” until you return
to the “Device settings” menu.
Menu
Battery status
Comfort settings
Remove cartridge
Device settings
Open Exit
Device settings
Date & Time
Sound
Name
Welcome picture
Change Back
Sound
OK Back
On
Off
Menu
Battery status
Comfort settings
Remove cartridge
Device settings
Open Exit
Device settings
Date & Time
Sound
Name
Welcome picture
Change Back
Name
Enter your name
OK Back
easypod
12a
12b
12c
12d
12e
12f