20
Section 1. Getting Started
Clinical settings
Injection settings
There are two Injection settings
for easypod:
• Cartridge
• Needle type
To change an Injection setting:
1. Open the “Clinical settings”
menu (20a) and enter the PIN
code (see page 14).
2. Use the “” key to highlight “Injection settings” (20b).
3. Select “Change” to open the “Injection settings” menu.
4. Follow the instructions on pages 21 and 22 to change an Injection setting (20c).
Menu
Comfort settings
Remove cartridge
Device settings
Clinical settings
Open Exit
Clinical settings
Dose settings
Injection settings
Cartridge expiration
Dose log
Change Back
Injection settings
Change Back
Cartridge
Needle type
20a
20b
20c
To Next Page
Loading...