Emec F Series - Hydraulic Installation

10
6. Hydraulic Installation
SuctionHose
TighteningNut
HoldingRing
PipeHolder
O-ring
Valve
Hydraulicconnectionsare:
Suction Hose with level probe and foot filter
Delivery Hose with injection valve
Discharge Hose
SuctionHose.
Completelyunscrewtighteningnutfrompump’sheadandremoveassembling
  components:tightening nut, holding ring and pipe holder.
Assemblyasshowninfig.(A).Inserthoseintopipeholderuntilitreachesthe 
  bottom.
  Lockhoseonpump’sheadbyscrewingdownthetighteningnut.
  Useonlyhandstodoit!
  Connectothersideofthehosetothefootfilterusingthesameprocedure.
fig.(A)