Emec F Series - Models

16
8. Models
LEVELALARM
CL,IS,IC,PV,TEandPVMtypepumpareprovidedwithaliquidlevelalarmtoindicateproducttankis
empty.ThelevelprobeisconnectedtotherightBNCplugonpump’sbottompanel.Thelevelprobe
ismadeofaN.O.reedcontact(10VA,1Amax.,230Vacmax.)closedbyafloatingmagnethousedina
(PP)plasticbox.Whentheproductlevelgoesbelowtheminimumthemagnetclosesthereedcontact.
ThepumpstopsandtheredLEDonpump’sfrontpanelindicatesthealarmstatus.
PUMPTYPES
Pumps mod. “FCL” (12-24 Vac/Vdc), “FIC”, “FIS”, “FPV” and “FPVM” are equipped with a bicolour led.
Led on, red colour: low level product alarm. Check product’s tank and restore the level.
Led on, blinking green colour: pump normal operating mode.
Led on, blinking green colour (one second on, one second off): power supply out of range. Check pump’s
label and check the main power.
FCOW
Flowknob
3Positionsselector
(Manual/Auto/OFF)
ActivityLed
Flowknob
Manualpriming
switch
ActivityLed
yellow/green(earth)
brown
(manual/powersupply)
blue
(common/powersupply)
black
(automati/PLC)
Manualmode:blue;brown;yellow/green
Automaticmode(PLCcontrolled):blue;black;yellow/green
24VACmodelisshippedwithoutyellow/greenwire
PLCConnections