6. Select the Use the following IP address button.
Figure 3-6: IP Address Properties
7. In the IP Address field, enter 192.168.1.11.
8. In the Subnet mask field, enter 255.255.255.0.
9. Select OK for both the Internet Protocol (TCP/IP) Properties window
and the Local Area Connection Properties window.
Note
Connecting to the gateway's secondary Ethernet port will require
different network settings.
Table 3-1: Network Settings
Ethernet Gateway PC/laptop/
tablet
Subnet
1 192.168.1.10 192.168.1.11 255.255.255.0
2 192.168.2.10 192.168.2.11
July 2022 Quick Start Guide
Quick Start Guide 13
To Next Page
Loading...
