WARNING
CRUSHING HAZARD
Do not remove flange stabilizers.
Attempting to do so could allow the meter to roll, resulting in serious injury or
equipment damage.
A. Flange stabilizers
WARNING
FLUID CONTENTS MAY BE UNDER PRESSURE
When the meter is under pressure, DO NOT attempt to remove or adjust the transducer
holder of the T-Slot transducer assembly, or loosen the screws holding the T-200
transducer assembly.
Attempting to do so could release pressurized gas or fluid, resulting in serious injury or
equipment damage.
Meter repairs Maintenance and Troubleshooting manual
August 2021 P/N 3-9000-791
42 Models 3415, 3416 and 3417 GUSM
To Next Page
Loading...
