The sensor
The sensor contains two position detectors that measure the exact position
and inclination of the laser beam as the shafts are rotated.
Bluetooth radio is integrated into the sensor for wireless transmission of
measurement data to the AMS 2140.
Terminology
The following terminologies are used throughout this document.
Term Meaning
Laser Refers to the laser head (yellow dust cap)
Sensor Refers to the sensor head (red dust cap)
Laser fixtures Refers to both the laser and sensor heads
2.2 Mount the brackets
Mount the brackets on opposite sides of the coupling on either the shafts or
on the solid coupling hubs, and both at the same rotational position.
Quick Start Guide December 2018
10 AMS 2140 Advanced Laser Alignment Application
To Next Page
Loading...
