K. The number of notes assigned to the job.
L. The number of data acquisitions for the job.
M. The alignment method for the job.
ALT1 keys
Option Description
F1 Intentionally blank.
F2 Intentionally blank.
F3 Enter machine dimensions for the machines being aligned. See Section 4.1 for
more information.
If thermal growth is enabled, enter thermal growth information. This is
available only in Advanced mode.
F4 Acquire alignment data using the alignment method defined for the job. See
Section 4.2 for more information.
If the foot pre-check option is enabled, check for soft foot. This is available
only in Advanced mode.
F5 View machine moves required to bring the machines into alignment.
If an alignment correction is necessary and requires a live move, do the
adjustment from this step.
See Section 4.3 for more information.
F6 Intentionally blank.
F7 Intentionally blank.
F8 Intentionally blank.
F9 Intentionally blank.
F10 Intentionally blank.
F11 Intentionally blank.
F12 Select
Sensor
Choose which Bluetooth sensor to communicate with.
The list is populated with Bluetooth devices already paired with the AMS
2140.
December 2018 Quick Start Guide
Quick Start Guide 5
To Next Page
Loading...
