Option Description
F10 Job Flow Select optional parameters to include as part of the current alignment
job. This is available only in Advanced mode.
Parameters include thermal growth, foot pre-check, live move
orientation, live move alerts, and an option to review alignment results.
Refer to the Alignment chapter of the AMS 2140 Machinery Health
Analyzer User Guide for more information on thermal growth, foot pre-
check, and reviewing of alignment results.
F11 Print Job Print a summary report of the alignment job to AMS Machinery Manager
or to a memory card inserted into the AMS 2140.
F12 Job Reset Reset the job data by clearing all stored data, loading default values, or
by loading default tolerance values.
December 2018 Quick Start Guide
Quick Start Guide 7
To Next Page
Loading...
