[5]
DANGER!
2 Safety instructions
Topics covered in this chapter:
•
Using the device
•
Owner's responsibility
•
Radio interference
•
ESD safety
To ensure safe operation, carefully observe all instructions in this manual.
The correct and safe use of this device requires that operating and service personnel both
understand and comply with general safety guidelines and observe the special safety
comments listed in this manual. Where necessary, safety-sensitive points on the device are
marked.
Because the device is electrical equipment, commissioning and service may be performed only
by trained and authorized personnel. Maintenance may be carried out only by trained,
specialized, and experienced personnel.
2.1 Using the device
Install and use the device as specified in this manual.
If the device is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
2.2 Owner's responsibility
If there is a reason to suspect that hazard-free operation, and thus, adequate machine
protection is no longer possible, take the device out of operation and safeguard it from
unintentional operation. This is the case:
• if the device shows visible damage.
• if the device no longer works.
• after any kind of overload that has exceeded the permissible limits (such as those
detailed in chapter "Technical data," section "Environmental conditions").
To Next Page
Loading...
Need help?
General