[71]
9 Online View
Topics covered in this chapter:
• Overview
• Details
•
Live data
After connecting Machine Studio with an EZ 1000 converter, the Online View of the
converter appears.
Figure 9-1: Online View - overview
A.
Connected devices in the device tree
B.
List of connected EZ 1000 converters
C.
A few details of the converter selected from the list.
To open the Online View of a specific EZ 1000, double-click it in the list, or click it in the
device tree. The Online View of the selected EZ 1000 opens. This view contains three tabs
Overview, Details, and Live data. Machine name, plant name, area, serial number, converter
type, firmware version, date of last change to the configuration, and the author of the last
configuration are shown at the top of each Online View page.
To Next Page
Loading...