[80]
3. Move the view to the desired position.
4. Release the mouse button to place the view at that point.
Right-click somewhere on the diagram to reset the view change.
Zoom in Use this function to stepwise enlarge the diagram view at mouse position.
1. Click the icon to activate the function. The button is colored light blue
if the function is activated.
2. Left-click an arbitrary point in the diagram. At every click, the view is
enlarged.
Right-click somewhere on the diagram to reset the view change.
Zoom
out
Use this function to stepwise reduce the diagram view at mouse position.
1. Click the icon to activate the function. The button is colored light blue
if the function is activated.
2. Left-click an arbitrary point in the diagram. At every click, the view is
reduced.
Right-click somewhere on the diagram to reset the view change.
Cursor Use the cursor within the diagram to display single values of the trend line.
The cursor function is activated as soon as the mouse is within the diagram
view.
Figure 9-15: Cursor
To Next Page
Loading...