Emerson Daniel Series User Manual

Figure 4-6: Typical installation for the RME
4.3.8 Install the security seal
Security seals protect the integrity of the turbine meter metrology and prevent
preamplifier and pickoff tampering. Follow the steps below to seal the electronics
enclosure of the Daniel 1500 LTM after commissioning. The security seal wires are
commercially available.
CAUTION
CUTTING HAZARD
Sharp edges may be present on the band shrouds. Wear appropriate personal protective
equipment when working on the turbine meter.
Failure to comply may cause serious injury.
User manual Prepare the turbine meter for use
P/N 3-9008-515 March 2019
User manual 67

Emerson Daniel Series Specifications

General

Type	Flow Meter
Repeatability	±0.1% of reading
Communication Protocol	HART, Modbus, Foundation Fieldbus
Output	4-20 mA, pulse, frequency
Process Connection	Flanged, wafer, threaded
Material	Stainless steel, carbon steel, Hastelloy
Operating Temperature	-40°C to +85°C (-40°F to +185°F)
Protection Rating	IP67, NEMA 4X
Fluid Compatibility	Liquids, gases