Appendix 1 Parameters 107
EV2000 Series Universal Variable Speed Drive User Manual
Group FL: Protection Parameters
Para. Name LCD display Setting range Unit
Factory
setting
Modif.
FL.18
Current at the last
fault
CURR AT
FAULT
0.0~999.9A 0.1A 0.0A *
FL.19
Frequency at the
last fault
FREQ AT
FAULT
0.00Hz~650.0Hz
0.01
Hz
0.00Hz *
Group Fn: Drive’s Parameters
Parameter Name LCD Display Setting range Unit
Factory
setting
Modification
Fn.00 Preset operating time ENGAGE RUN TIME 0~65.535K hours 0.001k hours 0
○
Fn.01 Total operating time TOTAL RUN TIME 0~65.535K hours 0.001k hours 0 *
Fn.02 Temperature of heatsink 1 HEATSINK1 TEMP
0.0~100.0
℃
0.1
0℃
*
Fn.03 Temperature of heatsink 2 HEATSINK2 TEMP
0.0~100.0
℃
0.1
0℃
*
Group FP: Parameter Security Functions
Parameter Name LCD Display Setting range Unit
Factory
setting
Modification
FP.00
User’s
password
USER
PASSWORD
0:No password
Others: Protected by Password
0 0
○
FP.01
Selection of
parameter
write-in states
PARA
PROTECTION
0: Modifying all parameters is enabled
1: Modifying other parameters is disabled except F0.00 and
EP.01
2: Modifying other parameters is disabled except EP.01
1 1
○
FP.02
Parameter
initialization
PARA
INITIALIZE
0: Parameter modification enabled state
1: clear the memorizing information (FL.14~19)
2: Recover the factory settings (before FL.13)
1 0
×
FP.03
Parameter
copy
PARA COPY
0:disabled
1:parameter upload
2:parameter download
3:parameter download (except the parameters related to the
drive itself)
Note: Only valid to LCD panel;
1 00
×
FP.04 Reserved RESERVED
-
- 0 *
Group FU: Factory Settings
Parameter Name LCD Display Setting range Unit Factory setting Modification
FU.00
Factory
password
FACTORY
PASSWORD
**** 1
Factory
password
-
To Next Page
Loading...
