Emerson Liebert GXT4 - 3 Operation and; Panel; LED Indicators; Figure 17 Operation and Display Panel

Operation and Display Panel
Liebert
®
GXT4
™
22
3.0 OPERATION AND DISPLAY PANEL
This chapter describes the Liebert GXT4 controls, particularly the operation and display panel on the
front of the Liebert GXT4. The panel has four control buttons, seven LED indicators and a liquid
crystal display (LCD), as shown in Figure 17.
Figure 17 Operation and display panel
3.1 LED Indicators
The five LED indicators on the front of the operation and display panel are:
• Inverter
•Battery
•Bypass
• ECO Mode
•Fault
Figure 17 shows the indicators’ locations; their descriptions and functions are shown in Table 4.
Table 4 LED indicators
LED Indicators
LED Color
Description
Inverter Green On when the inverter is supplying power
Bypass Amber
On when the load is supplied by the mains through
automatic/manual bypass
Battery Amber On when the load is supplied by the battery
Fault Red On when an error has occurred within the UPS
ECO Mode Green On when the UPS is in ECO Mode
ESC
Button
UP Button
Bypass
Indicator
DOWN Button
ECO Mode
Indicator
LCD
Panel
Battery Indicator
Fault
Indicator
Inverter Indicator
Enter
Button