Emerson Micro Motion 4200 - Wire the 9-Wire Remote-Mount Transmitter to the Sensor

Figure 2-4: Attaching and securing transmitter to mounting bracket
Tip
To ensure the mounting bracket holes are aligned, insert all attachment bolts into
place before tightening.
2.3 Wire the 9-wire remote-mount transmitter to
the sensor
Prerequisites
• Prepare 9-wire cable as described in the sensor documentation.
• Connect the cable to the sensor-mounted junction box as described in the sensor
documentation. You can access all product documentation on the documentation
DVD shipped with the product or at www.emerson.com/flowmeasurement.
Procedure
1. Remove the transmitter-to-sensor wiring compartment cover to reveal the terminal
connections.
Mounting and sensor wiring Installation Manual
April 2019 MMI-20058013
14 Micro Motion
®
4200 2-Wire Transmitter